Ajax FireProtect Plus (with CO)

Wireless fire detector with temperature and carbon oxide sensors that monitors security in the room twenty four hours a day and immediately notifies of dangerous CO levels, smoke and sharp jumps in temperature.

Authentication to prevent forgery
Jamming detection and communication channels encryption
Tampering alarm

121.00

15 in stock

SKU: AJX-FP-Pluse-White Categories: , , Tags: , , ,

Description

Principle of operation

The device detects smoke by means of a camera with a photoelectric sensor. An additional chemical element detects carbon oxide and raises the alarm.

Features

It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.

 

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

Tech specs

Classification Radio channel smoke detector with temperature sensor and built-in siren
Type of detector Wireless
Installation method Indoors
Compatibility Operates only with HubHub PlusHub 2ReX, , ocBridge PlusuartBridge
Sensing element Photoelectric, CO and temperature sensors
Alarm signal delivery time 0.15 s
Activation threshold +59°С ±2°С
Type of notification Sound/light
Volume of built-in siren 85 dB
Power supply Battery: Two CR2 batteries
Power supply voltage: 3 V
Battery life — up to 4 yearsBackup battery: CR2032
Jeweller radio technology Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices
Operating frequencies — 868.0-868.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Detector polling period — 12−300 s
Additional temperature sensor
Available
Permissible humidity Up to 80%
Anti-sabotage Protection against fraud
Jamming detection
Tamper-resistant
Remote setting and testing +
Interconnected alarms +
Dimensions 132 × 132 × 31 mm
Weight 220 g
Certification Conforms to the requirements of the technical regulations governing radio equipment,
EN 14604
Warranty Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
Complete set FireProtect Plus detector
SmartBracket mounting panel
2 x CR2 batteries (pre-installed)
1 x backup battery CR2032 (pre-installed)
Installation set
User’s guide